nikon z6

Nikon Z6

Nikon Z6 setup instructions for stop motion animation or time-lapse photography with Dragonframe

Dragonframe 4.1.6: YES
Dragonframe 3.7.3: NO
Dragon Stop Motion 2.3.8: NO
(Dragonframe was previously called Dragon Stop Motion)

The Nikon Z6 provides a live view via its USB connection. The live view size is 1024 x 680.

Dragonframe controls the Nikon Z6 ISO, shutter speed, aperture (with digital lens), image quality, and size.

The manufacturer's product page for the Nikon Z6 is here.

You can find the camera manual and specifications at this site.

To avoid flicker that can be caused by electronically controlled aperture lenses, please use a manual Nikon lens ('D' series). Read More

Setup Instructions

Power your camera by AC power if possible.
- - If you do use a battery, make sure it is fully charged.
- - If you use AC power, remove the battery.
Close any other applications that might connect to your camera.
- - For Mac OS X, Open Image Capture, select your camera, then in pop up area in lower-left select Connection camera opens: No application. (See Picture)
Make sure Dropbox is not a client of the camera.
You may need to quit Google Backup and Sync, since it can interfere with the camera even if you turn off synching.
If you have anti-virus software, white-list Dragonframe so that it may access your camera.
Create a new scene or open an existing scene. (Dragonframe will not connect to your camera unless you have a scene open.)
Set the Mode Dial to Manual (M).
Put the camera into live view mode and set Focus Mode to AF-S. (Then take camera out of live view mode.)
Set the lens' Focus Mode to AF if you want to control focus from Dragonframe.
Set Auto Image Rotation to Off.
Set Lens to Manual Focus and disable Vibration Reduction.
You may need to remove the CF/SD memory card.
If you need to use a flash/strobe, you must set Silent Live View Photography to Off.
Connect your camera to the computer with an appropriate USB cable.

Find camera troubleshooting tips in Frequently Asked Questions