nikon d100

Nikon D100
Nikon D100
Nikon D100 setup instructions for stop motion animation or time-lapse photography with Dragonframe

Supported Versions

Dragonframe 4.2.2: YES
Dragonframe 3.7.3: YES
Dragon Stop Motion 2.3.8: YES
(Dragonframe was previously called Dragon Stop Motion)

Live View

The Nikon D100 does not provide live-view. You have two options for using this camera with Dragonframe:

  1. Use a separate video camera or USB camera to provide live video.
  2. Work without live video, capturing 'preview' frames instead. (See User Guide in Help Menu).

Camera Settings

Dragonframe controls the Nikon D100 ISO, shutter speed, aperture (with digital lens), image quality, and size.

Product Info

You can find the Nikon D100 manual and specifications at the Nikon website.

Manual Lens to Avoid Flicker

To avoid flicker that can be caused by electronically controlled aperture lenses, please use a manual Nikon lens ('D' series). Learn More about Aperture Flicker

Setup Instructions

  1. Power your camera by AC power if possible.
    • - If you do use a battery, make sure it is fully charged.
    • - If you use AC power, remove the battery.
  2. Close any other applications that might connect to your camera.
    • - For macOS, Open Image Capture, select your camera, then in pop up area in lower-left select Connection camera opens: No application. (See Picture)
  3. Make sure Dropbox is not a client of the camera.
  4. You may need to quit Google Backup and Sync, since it can interfere with the camera even if you turn off syncing.
  5. If you have anti-virus software, white-list Dragonframe so that it may access your camera.
  6. Create a new scene or open an existing scene. (Dragonframe will not connect to your camera unless you have a scene open.)
  7. Set the Mode Dial to Manual (M).
  8. Set Auto Image Rotation to Off.
  9. If you use a Nikon digital lens, set Lens to Manual Focus and disable Vibration Reduction.
  10. You may need to remove the camera's memory card.
  11. This camera requires a 2.0 Firmware upgrade from Nikon.
  12. Set USB Mode to PTP.
  13. If you need to use a flash/strobe, you must set Silent Live View Photography to Off.
  14. Connect your camera to the computer with an appropriate USB cable.
Find camera troubleshooting tips in Frequently Asked Questions