Camera Setup Instructions2017-03-29T08:51:22+00:00

fujifilm x-pro2

Fujifilm X-Pro2
Fujifilm X-Pro2 setup instructions for stop motion animation or time-lapse photography with Dragonframe

Supported Versions

Dragonframe 4.1.4: YES
Dragonframe 3.7.1: NO
Dragon Stop Motion 2.3.8: NO
(Dragonframe was previously called Dragon Stop Motion)

Live View

The Fujifilm X-Pro2 provides a live view via its USB connection. The live view size is 1024 x 768.

Camera Settings

Dragonframe controls the Fujifilm X-Pro2 ISO, shutter speed, aperture (with digital lens), image quality, and size.

Product Info

The manufacturer's product page for the Fujifilm X-Pro2 is here.

You can find the camera manual and specifications at this site.

Setup Instructions

  1. Power your camera by AC power if possible.
    • - If you do use a battery, make sure it is fully charged.
    • - If you use AC power, remove the battery.
  2. Close any other applications that might connect to your camera.
    • - For Mac OS X, Open Image Capture, select your camera, then in pop up area in lower-left select Connection camera opens: No application. (See Picture)
  3. Make sure Dropbox is not a client of the camera.
  4. You may need to quit Google Backup and Sync, since it can interfere with the camera even if you turn off synching.
  5. If you have anti-virus software, white-list Dragonframe so that it may access your camera.
  6. Make sure your camera firmware is up to date. (At least 4.0 is required for tethered support.)
  7. Set SET UP : CONNECTION SETTING : PC CONNECTION MODE to USB TETHER SHOOTING FIXED.
  8. Connect your camera to the computer with an appropriate USB cable.
Find camera troubleshooting tips in Frequently Asked Questions